Focus on maximum quality
Magnetic cylinders
Work with absolute precision
The high-quality magnetic cylinders are made of a stainless steel body,in order to resist corrosion
- It does not deprive of the force of the magnet and allows a high and balanced adhesion to the flexible die during use.
- Is also possible to make them lighter , if the body is made of aluminum or hollow on the inside.
- We can also design positioning pins on the surface of the cylinder body to prevent the displacement of the flexible die.
Advantages of our magnetic cylinders
Absolute adaptability to all your jobs
Maximum precision
Magnetic cylinders manufactured to the correct tolerances guarantee maximum precision in die-cutting.
100% adaptable
For special applications and small diameters, cylinders with stronger neodymium magnets can be manufactured.
High quality
The 60 HRC hardened steel magnetic cylinder tracks ensure long-term performance.
Higher performance
We offer cylinder maintenance, repair and redesign services to ensure the best quality.
How to calculate the development of magnetic cylinders?
Do it easy with this table
The development of a cylinder can be easily calculated from the number of teeth (z).Only the pitch of the tooth or module (m) is required.
- Development (in inches) = z * m / π
- Development (in mm) = z * m
The labeling industry mainly uses cylinders with a tooth pitch of 1/8” CP = 3,175mm.
- Development (in inches) = z * 1/8
- Development (in mm) = z * 3,175
| N. OF TEETH | DEVELOPMENT IN INCHES | DEVELOPMENT IN MILLIMETERS |
|---|---|---|
|
Z 96 |
12″ |
304,8 mm |
|
Z 112 |
14″ |
355,6 mm |
|
Z 136 |
17″ |
431,8 mm |
|
Z 160 |
20″ |
508,0 mm |
|
Z 192 |
24″ |
609,6 mm |
